[TowerTalk] Flat Wrenches

[Don]

And metric.

Don W7WLL


On 7/21/2020 2:03 PM, K9MA wrote:

Speaking of which, it's hard to find wrenches thin enough to lock two 
6-32 or 8-32 nuts together. I have one old, cheap, Craftsman set that 
works, but sooner or later I'm going to lose one of those up on the 
tower. All the small wrench sets ("Ignition Wrenches") available seem to 
be too thick. Short of grinding them down, does anyone know where to get 
thin ones in SAE sizes?