[TowerTalk] Small mast advice

[Ross Tucker]

Thanks for the tip! What would you use steel or aluminum? What height do
you think is reasonable?

On Tue, Nov 10, 2020 at 18:08 Jim Rhodes <jimk0xu at gmail.com> wrote:

> If you got 2 of those and put one on each side directly opposite each
> other you could just tie them together to hold them against the sides. Use
> some tough foam or something to pad the bodywork.
>
> On Tue, Nov 10, 2020 at 6:51 PM Richard (Rick) Karlquist <
> richard at karlquist.com> wrote:
>
>>
>>
>> On 11/10/2020 3:40 PM, Ross Tucker wrote:
>>
>> > the RV park, she can't lay concrete or have excessive guying. I know
>> this
>>
>> Get one of those base mounts that your drive your vehicle on top
>> of.  That is just about as good as concrete for this purpose
>> and the RV park can't say any thing.
>>
>> For guying, "bracket it" to the RV with guy wires that
>> run along the roof of the RV then down the sides.  Again,
>> the RV park can't say any thing about these, and they
>> will be at the roof height of the RV.
>>
>> Rick N6RK
>>
>>
>> > limits our options... what would all of you recommend? Maybe
>> 1.5"-diameter
>> > steel mast? Aluminum? Do you think we can get 15' up safely? Any/all
>> > suggestions or advice is greatly appreciated. Thank you!
>> >
>> > Ross, NS7F
>> > _______________________________________________
>> >
>> >
>> >
>> > _______________________________________________
>> > TowerTalk mailing list
>> > TowerTalk at contesting.com
>> > http://lists.contesting.com/mailman/listinfo/towertalk
>> >
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk at contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>
>
> --
> Jim K0XU
> jim at rhodesend.net
>