[TowerTalk] Run all in same trench?

[Gary K9GS]

Thank you Eddie...that's an interesting idea.Thanks also to the others that replied. I think what I'm going to do is have the electrician do the trench and the 220 line, then I'll put in the PEX and probably 3" or 4" plastic conduit for the coax along with a length of pull line.This is in FL so I don't have to worry about freezing but condensation is a concern so I'll provide a way to drain the water out.Thanks again for the responses.73,Gary K9GS
-------- Original message --------From: Eddie <theseymours at live.com> Date: 10/15/20  5:45 PM  (GMT-06:00) To: towertalk at contesting.com Subject: Re: [TowerTalk] Run all in same trench? If using electrical conduit the sweeps can be made with a heat gun. Price is good this way.On 10/15/20 6:30 PM, jimlux wrote:> On 10/15/20 3:06 PM, John Simmons wrote:>> Or 4">>>>> It does start to get pricey, though..>> 4" is $6/ft> 2" is $2/ft> 1" is $0.90/ft>> and those sweep ells> 1" are $4> 2" are $9> 4" are $41>> The pipe is roughly linear with size, but man, those fitting go as the > square> _______________________________________________>>>> _______________________________________________> TowerTalk mailing list> TowerTalk at contesting.com> http://lists.contesting.com/mailman/listinfo/towertalk> .______________________________________________________________________________________________TowerTalk mailing listTowerTalk at contesting.comhttp://lists.contesting.com/mailman/listinfo/towertalk