[TowerTalk] Removal of Coaxiseal

[Mike Ryan]

Acetone works well to clean them...   Mike

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of
john at kk9a.com
Sent: Friday, September 25, 2020 2:46 PM
To: towertalk at contesting.com
Subject: Re: [TowerTalk] Removal of Coaxiseal

Probably not.  A while back I purchased some used connectors for 1 5/8  
Heliax and on a few of them someone had wrapped the butyl right on the  
connector instead of taping it first.  I used lacquer thinner and a  
lot of elbow grease to clean them. They came out great however it was  
not worth the effort. If coaxiseal is similar, it is probably much  
easier to cut the connectors off and install new ones before properly  
sealing them.

GL,
John KK9A


NR1DX wrote:

Is there an EASY and Effective way to remove coaxiseal  ( that sticky
black "silly putty") used to seal up ones connectors from water?

Dave
NR1DX

-- 
Dave Manuals at ArtekManuals.com www.ArtekManuals.com

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk