[TowerTalk] Removing ground rods (Paul Beckmann)

[Patrick Greenlee]

There is a thing called a post popper for manually removing T-posts from 
the ground.  It should do a good job too.

Patrick        NJ5G

------ Original Message ------
From: "tazcb at hotmail.com" <tazcb at hotmail.com>
To: "towertalk at contesting.com" <towertalk at contesting.com>
Sent: 3/30/2021 11:18:42 AM
Subject: Re: [TowerTalk] Removing ground rods (Paul Beckmann)

>Drill a 1/4in hole in the top of the ground rod perpendicular to its length. Feed a loop of wire through it and use a high lift jack to “jack” it out of the ground. Works every time.
>
>Don Walser
>N7IFO
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk at contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk