[TowerTalk] Pipe for guy anchor
Larry
lknain at nc.rr.com
Tue Aug 9 10:32:51 EDT 2022
I used I beam material rather than pipe. I have a 25G (75ft)and 45G
(100ft) both done that way. The I beams are anchored in concrete of
course. I had tabs added to the I beam for the guy ends on the 25G posts
and a 0.75 inch rod through holes in the I beam for the 45G. The guy
tabs are about 6 feet above ground to allow my tractor to run close but
under the guys. Both towers have been up for years and through
hurricanes and a tornado.
FWIW
73, Larry W6NWS
On 8/9/2022 8:34 AM, Rick Harrington N0VT wrote:
> I have a small lot and my tower is 70' of 25G. Due to some obstacles
> in the yard that can't be worked around I need to sink some metal pipe
> in concrete and attach the guys about 6 feet up instead of taking them
> down to the ground. I realize this isn't the preferred situation.
>
> What type of pipe should I be looking for?
>
> Thanks, Rick N0VT
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list