[TowerTalk] Hose Clamps Compared
Jim W7RY
jimw7ry at gmail.com
Tue Aug 9 14:06:16 EDT 2022
There have always been two of them on the antennas I've installed the
last 40+ years.
73, Jim W7RY
On 8/9/2022 12:57 PM, Jeff Blaine wrote:
> I could not remember what a DB224 was. Looked it up and was laughing
> to see the hose clamp on that antenna. The funny part is that in the
> current version, they have doubled up on the hose clamps - meaning
> there are 2 side by side.
>
> No doubt they added a 2nd hose clamp because the first one was
> ultimately inadequate to the task.
>
> 73/jeff/ac0c
> alpha-charlie-zero-charlie
> www.ac0c.com
>
>
> On 8/8/22 9:28 PM, Jeff Blaine wrote:
>> Apples and oranges.
>>
>> Hose clamps work fine with HORIZONTAL elements. The slightest
>> compression is adequate to contain most movement.
>>
>> But the issue K3PA mentions is with a vertical 4SQ. That is a
>> completely different issue all together. The tension must be high
>> enough to resist the total vertical force of the metal above, while
>> being twisted in the wind, over time and temp.
>>
>> And even here in Kansas, where the wind does blow on occasion, we can
>> appreciate the differences between 21' and 65' - assuming the 21'
>> mention is vertical in orientation.
>>
>> 73/jeff/ac0c
>> alpha-charlie-zero-charlie
>> www.ac0c.com
>>
>>
>> On 8/8/22 12:17 PM, john simmons wrote:
>>> And yet a popular and old design 21’ commercial antenna is
>>> successfully held together with one worm drive hose clamp
>>>
>>>> On Aug 8, 2022, at 11:19, Drew Vonada-Smith
>>>> <drew at whisperingwoods.org> wrote:
>>>>
>>>> Ouch. I think I bought a tomato slicer from that guy once.
>>>>
>>>> I've had better luck with the T-bar style clamps in the tougher
>>>> applications. But on my 80M 4SQ, which needed repairs every year,
>>>> I gave up and went to a combination of bolts, and rivets on the
>>>> smaller sections. Not a failure since. I've mostly given up on
>>>> hose clamps as a reliable antenna fastener.
>>>>
>>>> K3PA
>>>>
>>>> -----Original Message-----
>>>>
>>>> Message: 1
>>>> Date: Sun, 7 Aug 2022 20:53:15 -0400
>>>> From: Jon Pearl - W4ABC <jonpearl at tampabay.rr.com>
>>>> To: towertalk reflector <towertalk at contesting.com>
>>>> Cc: CrankupTiltoverTowers at groups.io
>>>> Subject: [TowerTalk] Hose Clamps Compared...
>>>> Message-ID: <f932d352-32fe-2a22-a0e9-3fe1e61a8e81 at tampabay.rr.com>
>>>> Content-Type: text/plain; charset=UTF-8; format=flowed
>>>>
>>>> Sixteen hose clamps are put through a torture test in the video,
>>>> below.?
>>>> A link to each clamp is provided under the description.
>>>>
>>>> https://www.youtube.com/watch?v=jtMPq2lG-8U
>>>>
>>>> 73,
>>>>
>>>>
>>>> Jon Pearl - W4ABC
>>>>
>>>> *********************************
>>>> _______________________________________________
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> TowerTalk mailing list
>>>> TowerTalk at contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>> _______________________________________________
>>>
>>>
>>>
>>> _______________________________________________
>>> TowerTalk mailing list
>>> TowerTalk at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/towertalk
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk at contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
--
Thanks and 73, Jim W7RY
More information about the TowerTalk
mailing list