[TowerTalk] Yaesu Rotors and Control Boxes

[Lee Hiers]

This is also an option...I just got a couple fory new tower I'm trying to
get going before contest season...

https://www.microham.com/contents/en-us/d50_ARCO.html


Lee, AA4GA

On Mon, Aug 29, 2022, 10:32 PM Pete Smith N4ZR <pete.n4zr at gmail.com> wrote:

> Hi Jim - I had a G-1000DXA- and a G-800SA, both with the SDX controller,
> controlled by the ERC interface.  The only functional difference is that
> the G-800SA controller requires an interface placed inside it, while the
> G-1000DXA was interface-ready.  That was a few years ago, but I have no
> reason to think it's changed.  I wrote a detailed review of this lash-up
> in the November 2014 issue of QST.
>
> 73, Pete N4ZR
> Check out the new Reverse Beacon Network
> web server at<https://reversebeacon.net>.
> For spots, please use your favorite
> "retail" DX cluster.
>
> On 8/29/2022 8:12 PM, Jim W7RY wrote:
> > Folks..
> >
> > What Yaesu control box can be used on a G800 SA rotor for computer
> > control of it?
> >
> > Can you use a DXA or SDX controller (with the ERC RS-232/USB kit) on a
> > G800 SA rotor?
> >
> > Asking for a friend... (No.... Really I am...)
> >
> >
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>