[TowerTalk] Info on K0XG products.

[Dave Sublette]

The Rohn manual will give you all the base and anchor data. If you plan to
spread your antennas over the complete height of the tower, you should put
the anchors out 175 feet from the base to give clearance to the elements.
Even then, you must plan the placement of each to be sure the elements will
clear the guys.

Good luck,

Dave, K4TO (200 foot Rotating Rohn 55)

On Tue, Jul 26, 2022 at 9:00 AM James M. Galm <jim at w8wts.com> wrote:

> Hello Everyone,
>
>
>
> I have acquired a 190 ft 55G rotating tower with K0XG guy rings and ground
> base (it belonged to W8HO, SK).  Does anyone know of a documentation
> archive
> for K0XG products?  Information such as foundation plans, parts lists, etc.
> would be helpful.
>
>
>
> Thanks in advance and 73,
>
>
>
> Jim, W8WTS
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>