[TowerTalk] Info on K0XG products.

[Steve Lott]

I highly recommend you contact Richard K0XG
For advice

And you are welcome to drop me a direct email
I am in process of my 130 foot Rotating tower build using the K0XG system

Base and Anchor depth
Is same as standard Rohn specs
However rotating tower base
Means drilling the concrete
For its anchor dimensions

Steve
KG5VK at arrl.org



On Tue, Jul 26, 2022 at 8:05 AM Dave Sublette <k4to.dave at gmail.com> wrote:

> The Rohn manual will give you all the base and anchor data. If you plan to
> spread your antennas over the complete height of the tower, you should put
> the anchors out 175 feet from the base to give clearance to the elements.
> Even then, you must plan the placement of each to be sure the elements will
> clear the guys.
>
> Good luck,
>
> Dave, K4TO (200 foot Rotating Rohn 55)
>
> On Tue, Jul 26, 2022 at 9:00 AM James M. Galm <jim at w8wts.com> wrote:
>
> > Hello Everyone,
> >
> >
> >
> > I have acquired a 190 ft 55G rotating tower with K0XG guy rings and
> ground
> > base (it belonged to W8HO, SK).  Does anyone know of a documentation
> > archive
> > for K0XG products?  Information such as foundation plans, parts lists,
> etc.
> > would be helpful.
> >
> >
> >
> > Thanks in advance and 73,
> >
> >
> >
> > Jim, W8WTS
> >
> >
> >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk at contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
-- 
Steve
*KG5VK*
*Steven Lott Smith*
Tele 318-470-9806
ARRL NTX Section Manager
*Please note: My Out Going Email address is LottsPhoto at Gmail.com*
*KG5VK at ARRL.ORG <KG5VK at ARRL.ORG> is forwarded to my Gmail address*