[TowerTalk] Taper conversions ...

[Joe Subich, W4TV]

Thanks, Steve.  I'll take a look at Yagi Mech.

73,

    ... Joe, W4TV

On 2022-07-29 11:54 AM, Steve Maki wrote:
> A method I've used (albeit a bit roundabout) is to use Yagi Mechanical 
> to determine the individual element resonant frequencies (for the 
> constant diameter elements), and then do the same with your tapered 
> elements and adjust tip lengths to get the same resonant frequencies.
> 
> -Steve K8LX
> 
> On 7/29/2022 9:48 AM, Joe Subich, W4TV wrote:
>>
>> I have some 6M Yagi designs with uniform element diameters
>> that I would like to build using tapered elements I have on
>> hand from the aluminum pile.
>>
>> Does anyone have a pointer to converting the uniform element
>> lengths to an arbitrary taper schedule?
>>
>> 73,
>>
>>     ... Joe, W4TV