[TowerTalk] EZNEC Pro/2+ and Pro/4+ v. 7.0.2 now available

[Dan Maguire]

Roy Lewallen has corrected two v. 7.0.1 bugs:

1) The Far Field table (via the "FF Tab" button) did not include
columns for relative phase.  In v. 7.0.1 the Far Field table typically
had Deg/V dB/H dB/Tot dB columns.  With v. 7.0.2 it now has Deg/V dB/H
dB/Tot dB/V Pha/H Pha columns.

If you explicitly do *not* want to include phase in the table use
Special Options FFPhase = Off in the .INI file.

2) When using *either* the builtin NEC-4.2 engine (NEC-4D, available
only with Pro/4+) *or* an external NEC-4.2 engine (Pro/2+ or Pro/4+),
switching between Real/High Accuracy and Real/Extended Accuracy ground
would not automatically signal that the engine must be run again to
update various calculated data items.  This was only a problem when
toggling between those two ground choices.  Switching to any other
type of ground (Free Space, Perfect, or Real/MININEC) *would* signal
that an engine rerun is required.  Now fixed.

Pro/2+ users can download EZNEC_Pro2+_702_setup.exe here:

https://eznec.com/v7download/pro2+download.php

Pro/4+ users can download EZNEC_Pro4+_702_setup.exe here:

https://eznec.com/pro4+_upgrade.htm

It is not necessary to uninstall v. 7.0.1 beforehand; v. 7.0.2 will
overwrite it.

Dan, AC6LA