[TowerTalk] EZNEC Pro/2+ and Pro/4+ v. 7.0.2 now available
Máximo EA1DDO_HK1H
ea1ddo at hotmail.com
Sat Apr 1 06:04:38 EDT 2023
Dan, thank you for the heads up.
73, Maximo
Máximo EA1DDO
www.EA1DDO.es
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of Dan Maguire
Sent: sábado, 1 de abril de 2023 8:01
To: towertalk <towertalk at contesting.com>
Subject: [TowerTalk] EZNEC Pro/2+ and Pro/4+ v. 7.0.2 now available
Roy Lewallen has corrected two v. 7.0.1 bugs:
1) The Far Field table (via the "FF Tab" button) did not include columns for relative phase. In v. 7.0.1 the Far Field table typically had Deg/V dB/H dB/Tot dB columns. With v. 7.0.2 it now has Deg/V dB/H dB/Tot dB/V Pha/H Pha columns.
If you explicitly do *not* want to include phase in the table use Special Options FFPhase = Off in the .INI file.
2) When using *either* the builtin NEC-4.2 engine (NEC-4D, available only with Pro/4+) *or* an external NEC-4.2 engine (Pro/2+ or Pro/4+), switching between Real/High Accuracy and Real/Extended Accuracy ground would not automatically signal that the engine must be run again to update various calculated data items. This was only a problem when toggling between those two ground choices. Switching to any other type of ground (Free Space, Perfect, or Real/MININEC) *would* signal that an engine rerun is required. Now fixed.
Pro/2+ users can download EZNEC_Pro2+_702_setup.exe here:
https://eznec.com/v7download/pro2+download.php
Pro/4+ users can download EZNEC_Pro4+_702_setup.exe here:
https://eznec.com/pro4+_upgrade.htm
It is not necessary to uninstall v. 7.0.1 beforehand; v. 7.0.2 will overwrite it.
Dan, AC6LA
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list