[TowerTalk] ROhn 25 Storage

[Artek Manuals]

Actually guys I am more concerned about insect nest builders here in 
Florida ( Wasps and spiders ) clogging up the tubes which later becomes 
water dams. People have been known to cause the same problem themselves 
on new Rohn 25 because they didn't know the bolts were stored in the legs.

I am in the process of tie wrapping the ends with pieces of 
screen....and tie wrapping it on

Dave
NR1DX


On 1/7/2023 8:08 AM, Dennis OConnor via TowerTalk wrote:
> The only stuff that actually works. Just a satisfied user here.
> I use it on our fertilizer sprayers. If you know anything about fertilizers you know it eats steel for lunch.And one or two coats of silver or galvanize paint to block UV rays.
> https://www.mrochem.com/BlackStar-Rust-Converter.html
>
>
> |
> |
> |
> | $0.00 |  |
>
>   |
>
>   |
> |
> |  |
> BlackStar Rust Converter | Mr OChem
>
> Get rid of Rust with BlackStar Rust Converter! It Kills rust and chemically converts it to a durable abrasion & ...
>   |
>
>   |
>
>   |
>
>
>
>
>
>
>
> Store horizontal.
> Pop plastic tape across the open ends (assuming the tubing is dry on the day you do that}If you are really anal put a fan to blow on the ends for a few hours on a warm day and then tape them off.You should be good to go then.
> Doc / k8do
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

-- 
Dave Manuals at ArtekManuals.com www.ArtekManuals.com