[TowerTalk] U-Bolt Sources

[Mike]

Be VERY careful with eBay sources unless you want METRIC sizes. If you run
across ANY that you like ANYWHERE better ask them if they are METRIC threads
or SAE.  That is unless you don't care. -Mike, K4CVL
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of Jim
W7RY
Sent: Friday, June 02, 2023 4:56 PM
To: towertalk at contesting.com
Subject: Re: [TowerTalk] U-Bolt Sources

DX Engineering.

Jim W7RY



On 6/2/2023 11:03 AM, Pete Smith N4ZR wrote:
> I need some good quality stainless U-bolts for 2" OD tubing,  > preferably
the type with the bolt plate that itself fits the tubing 
 > OD, rather the simple flat plates sold by local hardware stores. I > 
have looked on line, without success so far. Any ideas? >
-- 
Thanks and 73, Jim W7RY
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk