[TowerTalk] Detuning a tower .... was Open-wire transmission line
Richard (Rick) Karlquist
richard at karlquist.com
Tue Jan 2 13:18:38 EST 2024
If you run a wire down the center of a grounded tower, then the tower
functions as a Faraday cage so that the wire is non radiating. It will
still make a dandy shielded transmission line. If you run a wire
along side the tower but outside the tower, then you get the dual modes,
one radiating and one non-radiating. Good question though ...
73
Rick N6RK
On 1/2/2024 9:49 AM, David Gilbert wrote:
>
>
> Hi, Joe.
>
> Detuning a tower and shunt feeding a tower seem to be essentially the
> same mechanism except for whether there is a feed or not, and I've often
> wondered why running a wire down the center of a tower wouldn't create
> the same coaxial section as surrounding the tower with multiple wires.
> Has anyone successfully tried this? I couldn't find much of anything by
> searching online.
>
> Take care es 73,
> Dave AB7E
>
More information about the TowerTalk
mailing list