[TRLog] TR Log Version 5.99 release notes
Larry Tyree
tree@lady.axian.com
Mon, 24 Feb 1997 23:14:44 -0800 (PST)
Version 5.99 has been released. It has been sent to those on the
e-mail update list and posted on the BBS. Here are the release
notes:
Release notes for TR Logging Program - Version 5.99
25 February 1997
Version 5.99 - Released 25 February 1997
- Many DVK improvements. If you are not using the DVK port as a band
output port, you may not abort a message in progress. This can be
done with the ESCAPE key, or by activating a function key message
with the value DVK0.
Instead of hard wiring the DVK messages to the function keys F1-F4,
you may program which keys will activate the memories by setting
the values to DVK1 to DVK4. As a default, the CQ FUNCTION keys
F1 to F4 are set to DVK1 to DVK4. However, you now have control
over which messages get sent in the S&P mode. Also, CQ F10 is set
to DVK0 as a default (standard key to abort DVK message for some
software).
- Allowed the Alt-L command to be executed during Auto-CQs.
- Added Control-[ @ to send a space and call window if the is a question
mark in the call. This was requested so if you entered a partial
callsign with a ? in it, you can have it sent again at the end of
your CQ EXCHANGE message. Simply put a Control-[ and @ in your
message. If there is a ? in the callsign (as shown in the call
window), it will send a space, and then the call window contents.
- In the ARRL DX contest, if had a non numeric initial exchange (like
KW), the program would show you remaining mults for KW. This bug is
now fixed.
- If you pressed Control-Enter while completing a Search and Pounce
QSO and your cursor was in the call window, the program would still
send CW. This is now fixed.
- Added CQMODE and SAPMODE CW commands. To use these commands in
a CW message, put a Control-C, then the command, followed by a
Control-D. The CQMODE command will force you to be in the CQ
mode, and the SAPMODE command will force you to be in the Search
and Pounce mode.
- CW ENABLE command added (default = TRUE). When set to FALSE, all
cw from the program is disabled (except for that sent with the
paddle).
- Fixed missing equal sign after ICOM COMMAND PAUSE command when saved
in the LOGCFG.DAT file from the Control-J menu.
- If you are sending CW from the keyboard (using F10), pressing F10
again will stop keyboard CW (just like ESCAPE).
- Improved POST's dupesheet performance. It was really slow and
should work much faster now.
- Added SPACE BAR DUPE CHECK ENABLE command (default = TRUE). If you
set this to FALSE, pressing the SPACE BAR in CQ MODE will always
send your call and put you into the Search and Pounce mode.
- Fixed INITIAL EXCHANGE = QTH coming up with VE initial exchanges for
callsigns not in the database.
- Made the Alt-Z command show station info for a new callsign.
Version 5.98 - Released on 1 February 1997
- Updated OKOM.DOM file.
- Fixed multiplier check off sheet (POST R M C).
- Added selection of add/no-add calls not in TRMASTER with vanity updates.
- Simplified POST's U E F menu to use one general purpose command for
most file updates.
- Fixed title for ARRL VHF SS contest.
- Added INITIAL EXCHANGE CURSOR POS (AT START or AT END). Allows you
to place cursor in exchange window where you want it. This is
available on the Control-J menu.
- Fixed bug where POST got confused if a comment appeared after the
contest name in LOGCFG.DAT file.
- Increased resolution of AutoCQ pause times to one half second.
- Fixed error message at end of uudecode process.
- Improved TR SENDCW command - now allows use of the special control
characters just like function key memories.
- Added FARNSWOTH SPEED parameter - initial value = 25. Availalbe on
Control-J menu. This allows you to adjust the speed where the
farnsworth effect starts to cut in. Use higher values for more
farnsworth effect.
- Added new CW control character - ControlLeftBracket. When found in
a CW message, it expects a single integer after it (2-8). If it
finds a 2, it will toggle the FARNSWORTH ENABLE. 3 through 8 will
set the FARNSWORTH SPEED command to various values as follows:
3 - 25 4 - 35 5 - 45 6 - 55 7 - 75 and 8 - 95 WPM.
There was no 5.97 release.
Version 5.96 released on 12 January 1997
- Added way to process ARRL 10 meter log into TRMASTER.
- Added CUSTOM as an INITIAL EXCHANGE choice. Process the string defined
with CUSTOM INITIAL EXCHANGE STRING to build an initial exchange. The
following elements may be used:
CQZONE ITUZONE NAME QTH SECTION USER1 USER2
USER3 GRID FOC CHECK OLDCALL TENTEN
CQZONE and ITUZONE will first look in the TRMASTER database for an
entry. If it doesn't find one, it will use the data in CTY.DAT to
determine the zone.
- Expanded available choices for USER INFO SHOWN to include:
NAME QTH SECTION OLDCALL GRID CHECK SECTION
ZONE USER 1 USER 2 USER 3 CUSTOM FOC NUMBER
Note that CUSTOM is a choice here now as well. This will process
the string CUSTOM USER STRING to build the display. The following
elements may be used:
CQZONE ITUZONE NAME QTH SECTION USER1 USER2
USER3 GRID FOC CHECK OLDCALL TENTEN
CQZONE and ITUZONE will first look in the TRMASTER database for an
entry. If it doesn't find one, it will use the data in CTY.DAT to
determine the zone.
- Fixed O command in U E E editor (Old Call) - it would do nothing before.
- Eliminated bad crash if trying to use SCP with too little free memory.
- Send corrected call before 73 message with QSLButDoNotLog & bad exchange.
- Eliminated possible truncation of sprint simulator exchange.
- Fixed nameless calls being fetched in SPRINT simulator.
- Added QCWA GOLDEN contest (no scoring) + CheckAndChapterOrQTHExchange.
- Made | character only send name and space if there is a name there.
- Disabled shift keys during execution of the Alt-L command.
- Added POST R L - List multipliers worked.
- Made GetBeamHeading not crash if target grid same grid as MY GRID.
- Made entering DX QTH in Sprint unnecessary.
Manual for 5.95 available via anonymous ftp to jzap.com in pub/n6tr.
Look for man593.zip (word for windows 6.0) or man593w2.zip (word for
windows 2.0). This files can also be found on the TRLOG BBS.
Version 5.95 released on 21 December 1996
- Fixed bug with a six letter KC6 or KA2 call when the first five letters
matched an entry for Palau (T7) or Japan. The six letter calls now
show as USA.
- If you specified a HOME GRID, but were not using a contest that used
grids as multipliers, the program would come up in VGA mode, but not
put up the grid map. Now the program will not go into VGA mode.
- Added ARCI QSO PARTY contest.
- If you were adding a file to TRMASTER that contained duplicates, it
was possible for multiple entries to be made in the TRMASTER file.
This has been fixed. If you have multiple entries, you will need to
regenerate your TRMASTER file using the new version of POST.
- Increased MaximumCountries from 400 to 510. This is used by some
people for the FOC contest and they need 500.
- Added FOC NUMBER to INITIAL EXCHANGE and USER INFO SHOWN.
- Added procedure to move sections from ARRL 160 log to TRMASTER database.
- Made all ARRL Section QSOs in ARRL 160 count two points.
- Added DISTANCE start up for calculating distance between two grids.
To use, type TR DISTANCE and then enter the two grids.
- Fixed POST's L M multiplier check for ARRL 10 meter contest. Previously
it would not recognize domestic multipliers correctly.
- Added ARRL 10 QSOPointMethod - now /N and /T CW QSOs are 8 points.
- If you tried to use TR READ with an ARRL 10 meter log, it would hang
when it found a DX station. This has been fixed.
- Fixed some potential divide by zeros when computing grid distance.
- Appear to have fixed the LPT1 problem with video and paddle port.
- Reworked POST's QSL routines which interface to the names database. All
routines now use TRMASTER for their names. New name data entered during
QSL process is not saved in TRMASTER or NAMES.CMQ. Instead, a file called
NAMES.NEW is generated. This file can be imported into TRMASTER using the
POST U E F N file read command.
- The POST R V command (view notes) did not properly close the output
file. This meant if you were saving them to a disk file, some of
the last entries were missing. This has been fixed.
- When doing a base 64 decode (TR DEBASE64), the byte count showed the
number of bytes in the input file, not the output file. Also, some
improvements have been made to the routine to cover some different
file formats I have seen recently.
- The Section initial exchange was broken - it gave check and section.
Now it only gives you the section.
Version 5.94 - Released on 7 December 1996.
- Removed RIT commands for Yaesu - there isn't any way to make it work
with their firmware.
- Fixed FT1000 commands in LOGCFG.DAT file.
- Added OldCall as a USER FIELD which can be displayed (Control-J).
- Added routine to load in Old call / New call update file. A file
with the call changes from gate two is available as "gatetwo". It
has been included with this release. You can also get it from the
BBS or ftp to jzap.com in the pub/n6tr directory.
- Created OldCall field in TRMASTER database. Maximum length 12 bytes.
- Fixed QSL label T command - was broken when went to CTY.DAT file.
Version 5.93 - Released on 4 December 1996 (5.92 was only used at W7RM)
- Made inactive radio's band output port follow radio band change.
Before, you would have to Alt-R to the radio and have it's band
displayed for this to happen.
- Added Section initial exchange - just in time for the ARRL 160.
- Added FARNSWORTH ENABLE. Default is false and you can get to it with
(Control-J). I like how it works without having to adjust the speed.
Try it. If you really think the cut in needs to be programmable,
I will do it.
- Made SCP work with characters added during AutoStartSend. Before
the SCP display would stop updating after CW started.
- Made reminder posted messages stay up fixed number of seconds (60).
Before they would stay up until the next minute rolled around on
the clock. Eliminates the possibility of a message only being
displayed for one second if it is posted just before a new minute.
Reminder posted messages are also used for network error messages
and Packet Spot announcements.
- Improved multi nework error messages. Instead of just the nework
broken message after the 10th retry, you get a warning after 5 retries.
- Made the Control-Enter function (don't send CW) work for the S&P
mode.
- Added IC781 as radio type and send narrow filter command with mode.
Let me know what other radios need this.
- Added summary sheet for Stew Perry contest.
- Added the FT990 as a interfaced radio choice. Fixed the split
function for this radio.
- Attempt to make RIT shift keys work with Yaesu radios. Let me know
if it works.
- Added Control-W to erase window contents. Works the same as ESCAPE
without stopping CW.
Version 5.91 - Released 19 November 1996
- Made Control-\ or Control-Enter not disable function key CW messages.
- Changed FT990 RIT increment from 10 to 20 hertz (same as 4.05).
- Fixed bug with no CW space after / sign.
Version 5.90 - Released 18 November 1996
- Made = key work again (QuickQSLMessage2). This is an undocumented
feature that was removed a few versions ago, and someone missed it!
It will send EE as a QSL message.
- Added split frequency set for FT990. The command that the FT-1000
has for setting the B vfo doesn't exist on the 890/990. I now switch
to the B VFO, set the frequency, then switch back to the A VFO when
setting the frequency for the B vfo.
- Put RIT back in for FT990. Someone said it used to work - the 990
I had must have had old firmware because it never did. Hope it works
now. Maybe we should try the MP and see if it works (maybe someone
can play with the MP as a FT990 and see if anything happens).
- Made FT990 and FT890 same thing. It used to be the 990 used the same
commands as the 1000. However, it looks like the 890 is much closer.
Entering FT990 as the radio type.
- Added MULTI RETRY COUNT (default 30 - minimum 3) + Control-J. This is
the retry delay for the first two retires. Set this to 3 or 5 seconds
per computer in the network (minus 1 computer).
- Added PACKET ADD LF command (Control-J). Some packet guys needed this.
It adds a line feed whenever a carriage return is found. Default is
FALSE and you can get to it with Control-J.
- Improved base 64 decode. Someone sent me a file that didn't work, but
it does now.
- Fixed mode for JST radio. I was reading the filter width bit, not the
mode bit.
- Way to send "unique" CW. The following control characters have been
added to send CW elements of various lengths. The normal dit length
is 10 and the normal dah length is 30.
Dah Length = 22 Control-E Dit Length = 6 Control-P
Dah Length = 26 Control-Dash Dit Length = 8 Control-Q
Dah Length = 30 Control-K Dit Length = 10 Control-\
Dah Length = 34 Control-N Dit Length = 12 Control-V
Dah Length = 38 Control-O Dit Length = 14 Control-L
You can combine these elements with normal characters. For example,
you can send a six with a long dah with Control-O followed by an H.
Control characters can be programmed when using the Alt-P command
by pressing first Control-P, then the Control character you want.
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Sponsored by: Akorn Access, Inc. & N4VJ / K4AAA