[TRLog] Split operation problem

[n6tr@teleport.com]

> We have been using TRLog at our MM station, VE5RI, for over 3 years and are
> very pleased with it, except for a very few little glitches. One of these
> shows up when we are running split tx/rx on 40 meters. When attempting to
> work USA stations, we transmit in the 7050-7100 portion of the band and
> listen on a stated frequency between 7150-7300. We use TRLog control of our
> radio, usually a TS950SD, and set up the bandmap and SVGA functions. It
> works well when QSOs are tx/rx on the same freq, but when working split,
> TRLog picks up the change in freq as we transmit and clears the call window.
> This a damn nuisance because the call has to be re-entered after the QSO (if
> it can be remembered at all due to sleep deprivation). 
> 
> Is there a cure for this? Do we have something set up wrong?
> 
> Suggestions will be appreciated.

TR could probably do a better job about detecting the fact that you
are in split.  However, until that is done, there is one work around
if you are using the program to handle the PTT for the radio.  Set
NO POLL DURING PTT to TRUE.

Tree

--
FAQ on WWW:               http://www.contesting.com/trlogfaq.html
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:	  http://web.jzap.com/n6tr/trwish.html