[TRLog] Two radio mode problems

[NR1DX]

I started playing with the two radio mode for the first time, and I must be
missing something cant get it to talk to both radios.

The first radio is a TS-950 on COM2
The second radio is a TS-870 on COM3.


The program recognizes and controls Radio #1 just fine, but I cant get
communication with the second radio to occur when I hit the Space Bar.  When I
set up in single radio mode I can get the program to talk to which ever radio
is set up so I know the radio and COM port designations work for both radios
individually. I also tried changing which radio is  #1 vs #2. Below are the
relevant commands from the .CFG file

TWO RADIO MODE = TRUE
KEYER RADIO ONE OUTPUT PORT = PARALLEL 1
KEYER RADIO TWO OUTPUT PORT = PARALLEL 2
RADIO ONE TYPE = TS950
RADIO TWO TYPE = TS870
RADIO ONE CONTROL PORT = SERIAL 2
RADIO TWO CONTROL PORT = SERIAL 3
RADIO ONE BAUD RATE = 4800
RADIO TWO BAUD RATE = 9600

Any clues? What did I miss?
NR1DX
Dave



--
FAQ on WWW:               http://www.contesting.com/trlogfaq.html
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:	  http://web.jzap.com/n6tr/trwish.html