[TRLog] Still struggling with Byterunner serial card

[NR1DX]

Typo below, that should say Windows based program communicates fine with the radio on COM3

At 09:38 PM 10/19/00 -0400, NR1DX wrote:
>
>A few weeks ago I put out a query for help with the byte runner serial card. and getting it to run with TRLOG, A few suggestions but still no joy in mudville.
>
>I have the COM1 and COM2 ports set up on the mother board with their standard addresses and IRQ's. I have taken all other plug in cards out of the machine but the Byterunner serial card.
>The Byterunner by default now comes up at address A020 for COM3 (not the standard 3E8). <TR PORTS> however still does not see COM3. Byterunner WEB site provided a program called VSEMUIO.COM which is a DOS TSR which allows me to assign a standard Address and IRQ to the card. I run the TSR setting the address to 3E8 and IRQ4 . Now <TR PORTS> says that the port is there at 3E8, but TRlog still dosent see (i.e. no communication with the radio) the card when I run <TR>. 
>
>My windows based logging program communicates fine with the radio on COM4, so I know the radio and the port are working.
>
>Helpppppp !
>
>Dave 
>NR1DX
>dit dit
>
>--
>FAQ on WWW:               http://www.contesting.com/FAQ/trlog
>Submissions:              trlog@contesting.com
>Administrative requests:  trlog-REQUEST@contesting.com
>Problems:                 owner-trlog@contesting.com
>Feature Wishlist:	  http://web.jzap.com/n6tr/trwish.html
> 

--
FAQ on WWW:               http://www.contesting.com/FAQ/trlog
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:	  http://web.jzap.com/n6tr/trwish.html