[TRLog] TS-850 CW

[Tony Casciato, AI9X]

Jerry,
 Check and make sure that you are telling TR Log which port to use to key
the TX (Parallel/Serial 1, 2 etc). For my setup, I am using Parallel Port 1
(P1). I'm not familiar with the W1WEF interface, so the above may not apply
(I built my own DB25 style interface).
 Maybe also try the PTT ENABLE = TRUE, if you are not using VOX from TRLog.

73,
Tony
----- Original Message -----
From: "Jerry Heien" <n9avy@mc.net>
To: <trlog@contesting.com>
Sent: Friday, July 05, 2002 12:08 PM
Subject: [TRLog] TS-850 CW


> Been trying to get TR Log (v 6.68) to send CW with my TS-850 and HP P166
run in
> DOS mode. I bought the CW interface (W1WEF), but still can't get it
working.
> Figure it must be something obvious I've overlooked.
>
> I can key the rig in CW mode by shorting the phono plug going to key jack
on
> rig. When I first turn on the computer it will key the rig for several
seconds.
> Went through the logcgf file and everything that should be turned on seems
to
> be.
>
> Can anyone tell me what's wrong ???
>
> Thanks in advance.
>
> 73,  Jerry,  N9AVY
>
>
> P.S.  TR runs great in all the contests, but interfacing seems to stump
me.
>
>
> _______________________________________________
> TRLog mailing list
> TRLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog