[TRLog] Frequency Readout and TS2000

G0MIC@aol.com G0MIC@aol.com
Thu, 23 May 2002 14:38:57 EDT


I am having problems getting a frequency displayed or any band change made on 
the radio being registered with TR.

Set up is TR 6.65a Comm speed 9600 Radio TS2000 Laptop PC is Thinkpad 350C 
(486SL @25MHz) DOS 6.22

Using Kermit I can send and receive data from the TS2000 such that I get a 
correct response to a command e.g. send 'FA;'  get back 'FA00014025000;'  
when I am tuned to 14.025MHz on VFO A.

Using TR I can enter a frequency in the callsign field and send it to the rig 
which changes to match. Right and Left Shift keys change RIT +/- or zero it 
if done together. Alt B, V and M all do what the manual says they do. 
Basically the computer controls the rig as one expects.

Radio Config parameters
RADIO ONE BAUD RATE = 9600
RADIO ONE CONTROL PORT = SERIAL 1
RADIO ONE TYPE = TS2000

Running TR radiodebug gives a zero length file.

On the rig there is the 'PC' being displayed in top right corner of display.

Can you help please?

Thank you in advance

Malcolm
 G0MIC