[Trlog] SO2R

[Mike Wetzel]

Howie,

I wondered about this also but by setting "BAND MAP ALL BANDS = TRUE" then
the 2nd radio's band map is shown.  You can also turn off the CQ's frequency
showing on the main radio (I forget the exact wording).  This seems to work
fine.  It did work slightly differently a few versions ago but the result I
believe is the same.

Mike W9RE

> -----Original Message-----
> From: trlog-bounces at contesting.com
> [mailto:trlog-bounces at contesting.com]On Behalf Of Howard Hoyt
> Sent: Wednesday, December 17, 2003 10:27 PM
> To: trlog at contesting.com
> Subject: [Trlog] SO2R
>
>
> Seems to me if TWO RADIO MODE = TRUE, it would make more sense to display
> the bandmap for the inactive (S&P) radio ???
>
> Personally, I don't much care about the bandmap on the run radio. But I
> do care
> about having to do an ALT-D to see if a call is a DUPE vs automagic
> display that is
> done for the active radio.
>
> I guess I can circum-navigate by doing a CTL-A CQ and making the active
> radio the RUN
> radio, but am wondering if it would not be more logical to have the
> bandmap assigned to
> the inactive radio for SO2R ?
>
> Perhaps there could be an option to allow this <if> in two radio mode ?
>
> 73, Howie
>
> --
> Howard Hoyt N4AF
> http://www.qsl.net/n4af
> Bluebird Trail
> Blounts Creek, NC
> 27814
>
>
> _______________________________________________
> Trlog mailing list
> Trlog at contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
>