[Trlog] Version 6.73 and Tentec Interface

[George Fremin III]

On Mon, Jun 30, 2003 at 05:49:56PM -0400, vilbe8 at aol.com wrote:

> I loaded Version 6.73 and ran Field day this past weekend.  I had a TS-2000 
> connected to COM1 and the TenTec OMNI VI to Com2.  I had a major problem with 
> the computer and the TenTec communicating.  Most of the time, they were not 
> communicating.  About 20% of the time, the program functioned normally.  The rest 
> of the time, it was not good.  
> 
> BTW, no problem at all with the Kenwood.
> 
> I tried using just the Tentec, no luck.

Ron did some work on the Ten-Tec interface. 

Here are some suggestions.

I did not have one to try so I would like to hear 
how this works out for the Omni VI.


You need to set the Cde setting in the Omni menu to OFF.

You might try setting the radio type to IC-781

Also see:

http://lists.contesting.com/_trlog/2003-March/010305.html

and 

http://lists.contesting.com/_trlog/2003-January/009961.html

Let me know how things work or dont.

-- 
George Fremin III - K5TR
geoiii at kkn.net
http://www.kkn.net/~k5tr