[Trlog] Version 6.73 Problem--Additional Details and Verification

[George Fremin III]

On Tue, Jul 22, 2003 at 11:33:35PM -0400, Bob Wanderer wrote:
> I just double-checked the details of my previous posting on
> the subject.
> 
> Using the previously post logcfg.dat for IARU, I started in
> ver 6.73.  To get spots into the bandmap, I connected to the
> local cluster and did a sh/dx to get several 40 and 20 meter
> spots.  The problem occurred.  In both CQ and S&P modes, the
> call in the bandmap blinked and that was it.  In S&P, the
> call did not appear in the callsign window.
> 
> After disconnecting from the cluster and erasing the
> log.dat, restart.bin and bandmap.bin files, I changed to
> version 6.72.  I reconnected to the cluster and performed
> sh/dx again.  In CQ mode, as expected, the call in the
> bandmap blinked but did not show up in the callsign window.
> In S&P mode, the call (and IARU Zone) were displayed in the
> callsign window while simultaneously blinking in the
> bandmap, and the statistics (QSO & Mult needs for that
> callsign) were displayed in the upper right-hand corner of
> the screen.
> 

I have read both of your posts on this subject and I think I 
understand now what you are describing.  I will have to let 
someone else test this and give you feedback as I do not have
a way to feed packet spots into TR-Log at my station 
at the moment.


-- 
George Fremin III - K5TR
geoiii at kkn.net
http://www.kkn.net/~k5tr