[Trlog] TRlog - Icom IC-756proII ?

[Mirko Sibilja]

Hi Paul,

I experienced same problem with IC-751A several years ago, in my case
increasing Icom response timeout solved the problem. Which baud rate you are
using? Try with decreasing it to 1200 (that helped with friend's IC-775
issues with displaying frequency).

73!  Mirko, S57AD
----- Original Message -----
From: Paul Erickson <va7nt at telus.net>
To: TRlog reflector <trlog at contesting.com>
Sent: Wednesday, August 18, 2004 6:23 PM
Subject: [Trlog] TRlog - Icom IC-756proII ?


> I would appreciate hearing from any IC-756pro users. I have one up and
> running, except for the fact that the rig frequency is not displayed on
> the screen. Is this normal, or do I have an interface problem? I can
> change frequency with the computer, both altB/V and with direct
> frequency entry. I am wondering if the rig is getting info from the
> computer, but the computer is not getting info from the rig, which would
> indicate a problem with the rx side of the interface.
>
> Thanks in advance.
> --
> ----------------------------------------------------------------
> cheers, Paul - VA7NT - email: va7nt at telus.net
>
> "Those who hear not the music, think the dancers mad."
>
>
> _______________________________________________
> Trlog mailing list
> Trlog at contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog