[Trlog] Rescore Command

[RGrace-WA6OWM]

Jim,
Turn off the 'Save to Floppy' in the LOGCFG.DAT file.
Add a Semicolon ";" to the following lines,
; FLOPPY FILE SAVE NAME=
; FLOPPY FILE SAVE FREQUENCY=
Then 'RESCORE', on my 486 Laptop, it takes about 5-minutes to do 1400
entries.
Ray - WA6OWM

----- Original Message ----- 
From: "Jim George" <n3bb at mindspring.com>
To: "TRlog reflector" <trlog at contesting.com>
Sent: Wednesday, July 14, 2004 4:58 AM
Subject: [Trlog] Rescore Command


> The need to do the "RESCORE" capability of TR is pretty lame!  I went thru
> the procedure per K5TR's email.  It worked OK, and the "rate" at 99 WPM
etc
> was about 1100 QSO/hour.  At that rate it was going to take over an hour
> and a half with my 1800+ QSO log.  The little 486DX DOS SO2R PC was
writing
> furiously to its disk drive, etc.  I gave it up after about 20% of the way
> thru and said to myself "this isn't worth it." and sent in the Cabrillo
> file for "god to sort it out."  I love TR.  It's the greatest for
> SO2R.  But things like this are not satisfactory at all.
>
>
> _______________________________________________
> Trlog mailing list
> Trlog at contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
>