[Trlog] Re: [PVRC] TR-Log on fast computer.

[Martin Kratoska]

Yes, that's true. There is a problem with MS-DOS 6.22 caused by the 
graph.tpu module used in many applications compiled under Borland's 
Turbo Pascal ver. 6 or 7 if there are timing-critical routines (and 
TR-Log USES such routines!). There is a patch but its application is not 
very simple, also source code needed. I recommend to use another DOS 
than MS-DOS. Good choice is the Caldera (DR) DOS 7.03 or later which is 
also free for non-commercial use. I tested also the IBM DOS 2000 with 
great success.

73,
Martin, OK1RR

kd4d at comcast.net napsal(a):

>Hi BP:
>
>You may want to try installing that version of DOS, and its
>support files, on the hard drive rather than 6.22.  Let
>us know if that also works.  I haven't had any trouble on these
>machines.
>
>This sounds like it could be a problem with 6.22.
>
>73,
>
>Mark, KD4D
>
>
>  
>
>>Hi All,
>>Mark, KD4D, suggested to download Win-98SE boot disk and boot the computer. 
>>I did it a bit different: created bootable diskette on Win-98 machine 
>>(format a: /s) and booted 3.2 GHz computer to it. Then I accessed TR 
>>directory on C: drive and everything works OK. If I access the very same 
>>directory via dual boot and run TR-Log - the runtime error pops up within 
>>few seconds.
>>Thanks all responded.
>>
>>73!
>>bp (wf3j) 
>>
>>_______________________________________________
>>PVRC mailing list
>>PVRC at mailman.qth.net
>>http://mailman.qth.net/mailman/listinfo/pvrc
>>    
>>
>_______________________________________________
>Trlog mailing list
>Trlog at contesting.com
>http://lists.contesting.com/mailman/listinfo/trlog
>
>
>
>  
>