[Trlog] Multi port PCI serial cards with setcomm.exe
Jim Smith
jimsmith at shaw.ca
Tue Nov 30 18:55:41 EST 2004
Thanks to replies both on and off list I now have a copy of Setcomm
1.1. I can hardly wait to get spots into TR.
I understand that there was a later version which included parallel port
support but that isn't an issue for me.
73, Jim VE7FO
A. Sewell wrote:
> Jim,
>
> I found it and was able to download it from
> http://www.qsl.net/ut2io/setcomm.exe. I did a quick look and found it
> is version 1.1. If you have any problems downloading let me know and
> I will email it to you.
>
> 73,
>
> Alan N5NA
>
> Jim Smith wrote:
>
>> Some time ago NG7M posted a description of a little utility he had
>> written (setcomm.exe) to make all 8 ports of a byte runner PCI serial
>> card available to TR running under Win 98.
>>
>> It was available as setcomm.zip at
>> ftp://nc7j.qrq.com/trlog/setcomm.zip Unfortunately, that link
>> doesn't work anymore. I e-mailed Max a couple of weeks ago about it
>> but, so far, no reply.
>>
>> Does anyone have a copy of setcomm.zip or setcomm.exe? If so, I'd
>> sure appreciate it if you would send me a copy as it looks like it
>> plus a Byterunner card are the answer to my dilemma of not enough
>> serial ports and no more IRQs available for more serial cards.
>>
>> 73 de Jim Smith VE7FO
>>
>>
>> _______________________________________________
>> Trlog mailing list
>> Trlog at contesting.com
>> http://lists.contesting.com/mailman/listinfo/trlog
>>
>
More information about the Trlog
mailing list