[Trlog] Keyboard command to switch vfos

[Ken Beals]

Bob:

Go to the Elecraft site and download the "KIO2
Programmer's Manual".  It has all the codes for the
K2.  

Looks like an FR0 (that's a zero) will set VFO A
receive, FR1 sets VFO B receive.  This command also
sets the split mode on/off automatically.  That should
be all you need.  

Otherwise you can always use the SW commands and get
any combination of button presses you need.

Ken

--- Bob Tellefsen <n6wg at comcast.net> wrote:

> I'm working on programming a couple of buttons to
> allow
> keyboard switching from vfo A to B and back again.
> George Fremin pointed me to section 5.3 in the
> manual, which
> shows how, sort of, but I need to know what codes a
> Kenwood
> would want to see to do this.  I'm actually using a
> K2, but it is
> supposed to accept the Kenwood codes.
> 
> Can anyone help with this?
> Thanks and 73
> Bob N6WG
> _______________________________________________
> Trlog mailing list
> Trlog at contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
>