[Trlog] Will Multi Mode Work in Windows?

RGrace-WA6OWM rgrace1 at adelphia.net
Wed Oct 20 20:26:08 EDT 2004

As Tree expressed, Win-XP does strange things. Keep the old W95/98 machines 
around for TR-Log. This past Field Day we had 4-laptops (with one Serial and 
Parallel port) running W2K, we did have a problem with the internal clock 
changing from time back to 0 hours 0 minutes during operation. It happened 
on all 4 laptops. So some of the log times had to be corrected in the 
post-FD log review. The other problem we had was W2K did not allow TR-Log to 
use the LPT: port for CW, again like Tree said. I tried using There was only 
one CW station, and we switched out with W98se laptop. Remember to check the 
Serial ports (TR PORT and W-XP SystemProperties-Device Manager-Ports(COM & 
LPT)), should Serial 5 or 6 show up, my second Serial is an USB port and no 
address... I hope it will provide you an address for the command 'Serial 
5(6) Port Address = '.
Good luck
Ray - WA6OWM
wa6owm at arrl.net
----- Original Message ----- 
From: <k9cc at comcast.net>
To: <trlog at contesting.com>
Sent: Wednesday, October 20, 2004 2:27 PM
Subject: [Trlog] Will Multi Mode Work in Windows?

> Has anyone used the multi mode feature of TR in Windows? Both computers 
> work ok by themselves, but they won't link. One is win 95, the other is 
> win xp. I always use DOS, (single op), but I need to do a multi op using 
> windows if possible. Reason why, is long story.
> George K9CC
> _______________________________________________
> Trlog mailing list
> Trlog at contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog

More information about the Trlog mailing list