[Trlog] New TR684.ZIP

[K4RO Kirk Pickering]

Looking deeper in your band decoder manual, it looks
like there is a jumper that must be set for Icom radios. 
It looks like you only have a choice between 1200 and 
9600 baud with the WX0B band decoder for Icom radios. 
Do you have everything (radios, band decoders, and TR-Log)
set at 9600 baud?



On Thu, Nov 02, 2006 at 03:56:09PM -0600, VE5ZX wrote:
> I have a pair of CI-V. I spent hour trying to get the DBS-2 to talk to my 
> 736 and 746 Pro. I could see the digital stream from the Icom at the right 
> point on the PIC in the DBS but the PIC won't produce any output. After 
> discussion with Array Solution I found that original developer/producer was 
> SK and no schematics or support material other than the manual was 
> available. So I changed my strategy from having the DBS-2 talking directly 
> to the Icom I decided to take the band output from TR. Not an ideal 
> solution but a solution never the less. TR 679 works perfectly fine with 
> this setup. TR684 does not work. It does talk to the Icoms okay but the 
> band output will not follow the rigs and hence I loss control of my 
> antennas and BP. A bad setting? A bug?  Not sure. I can always run 679 - it 
> worked fine in the CQWW SSB.