[Trlog] No data from CAT to computer...

[John Dvoracek]

The fine details escape me, but ensure your serial port is enabled
(powered on) in DOS.  Use the "Configuration utility for DOS":

http://www-307.ibm.com/pc/support/site.wss/MIGR-4ZFPEG.html

I don't remember much, but I installed that after FreeDOS and then
used a command line interface to turn my serial port on.

73--John

> RADIO ONE CONTROL PORT = SERIAL 1
>
> i have tried changing the value of Serial 1 to 4.