[Trlog] No data from CAT to computer...

[paul at paul-hicks.ca]

Thank to all of you for useful suggestions. Have installed the 
suggested Utility.

I should have also mentioned that when using TR4W, data does pass 
from the rig to the computer. However, I prefer to get the dos version running.

Here's where I am at present:

Using the PS2 SERA utility, says CURRENT STATUS: DISABLED

"When "enable" is selected, following parameter will be effective:

ADDress: 1
IRQ: 4
COMADDRess: 3F8

As for "address"

1: COM1 (3F8h, IRQ4)
2: etc.

+++++++++++++++++++++++++++++++




At 12:18 PM 16/04/2010, you wrote:
>Hi Paul:
>
>Three suggestions that might help:
>1)  Make sure serial port isn't disabled in the BIOS.
>2)  Set the baud rate in the logcfg.dat file.
>3)  Double check that you aren't accidentally using a null modem cable.
>
>The MSDOS "msd" utility will show the installed serial ports.  You 
>might also try that.
>
>73,
>
>Mark, kd4d
>
>paul at paul-hicks.ca wrote:
>
> >Hi there,
> >
> >I have a IBM A30p ThinkPad with a partition with FreeDOS build 
> 2036 installed.
> >
> >Am using latest version 6.94 TR-Log.
> >
> >DB9 connects FT1000MP to DB9 on Thinkpad.
> >
> >Using very simple logcfg.dat file trying to troubleshoot, but out of ideas.
> >
> >MY CALL = VE3ZT
> >
> >CONTEST = GENERAL QSO
> >
> >DISPLAY MODE = COLOR
> >
> >RADIO ONE TYPE = FT1000MP
> >
> >KEYER RADIO ONE OUTPUT PORT = PARALLEL 1
> >
> >RADIO ONE CONTROL PORT = SERIAL 1
> >
> >i have tried changing the value of Serial 1 to 4.
> >
> >Have also swapped out the serial cable. Same results.
> >
> >Can anybody help me out with some idea?
> >
> >Thank you.
> >
> >Paul
> >ve3zt
> >
> >_______________________________________________
> >Trlog mailing list
> >Trlog at contesting.com
> >http://lists.contesting.com/mailman/listinfo/trlog
>
>--
>Sent from my Android phone with K-9 Mail. Please excuse my brevity.
>
>
>
>Checked by AVG - www.avg.com
>Version: 9.0.801 / Virus Database: 271.1.1/2814 - Release Date: 
>04/16/10 02:31:00