[Trlog] Winkeyer USB sidetone

[Martin Kratoska]

Kevin,

TNX but does not work here. Works with my home built keyers but not with 
Winkey 3.1 - it is initialized to its default state which has sidetone = 
on. CW TONE = 0 does not override it ... this is THE PROBLEM...

73,
Martin, OK1RR

Dne 31. 05. 22 v 1:24 w9cf at arrl.net napsal(a):
> CW TONE = 0
> in LOGCFG.DAT (or equivalent) should turn off the sidetone.
> 
> 73 Kevin w9cf
> 
> On Tue, May 31, 2022 at 01:09:44AM +0200, Martin Kratoska wrote:
>> Among others I own also the Microham DXP which has a Winkeyer v.3 chip
>> inside. The bad thing is that at every start the Winkeyer is initialized to
>> the default Host Mode state which means that the sidetone is on.
>>
>> The sidetone is actually needed only in Command Mode, otherwise the keyer
>> should be silent. Now I must switch off the sidetone with A command after
>> every program start which is annoying. What I missed? Is there a hidden
>> switch allowing to start the keyer into silent state?
>>
>> 73,
>> Martin, OK1RR
>> _______________________________________________
>> Trlog mailing list
>> Trlog at contesting.com
>> http://lists.contesting.com/mailman/listinfo/trlog
> _______________________________________________
> Trlog mailing list
> Trlog at contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog