[Trlog] Rig Control

[George Fremin III]

On Mon, Sep 19, 2022 at 12:37:16PM -0700, Kevin Schmidt wrote:
> 
> Alternatively, I think it should also work if you use the built in icom
> rig control:
> 
> radio one baud rate = 115200
> radio one control port = serial /dev/ttyUSB0
> radio one receiver address = 148
> 

Yes - this should work.

I used the progam with some 7851 radios in 2017 with something like:

Radio One Type = IC781
Radio One Baud Rate = 19200
Radio One Receiver Address = 38
Radio One Control Port = serial /dev/ttyUSB0

Need to make sure the receiver address and baud rate and port are
correct.


-- 
George Fremin III - K5TR
geoiii at kkn.net
http://www.kkn.net/~k5tr