[Trlog] Rig Control

[Ed]

On Mon, 19 Sep 2022 19:42:37 +0000
George Fremin III <geoiii at kkn.net> wrote:

> On Mon, Sep 19, 2022 at 12:37:16PM -0700, Kevin Schmidt wrote:
> > 
> > Alternatively, I think it should also work if you use the built in
> > icom rig control:
> > 
> > radio one baud rate = 115200
> > radio one control port = serial /dev/ttyUSB0
> > radio one receiver address = 148
> >   
> 
> Yes - this should work.
> 
> I used the progam with some 7851 radios in 2017 with something like:
> 
> Radio One Type = IC781
> Radio One Baud Rate = 19200
> Radio One Receiver Address = 38
> Radio One Control Port = serial /dev/ttyUSB0
> 
> Need to make sure the receiver address and baud rate and port are
> correct.
> 
> 

Thanks.

Now to get trlog working. I keep getting this Error: Command not found.

Followed the PDF, trlog is executable. I'm missing something somewhere.

Ed