[UK-CONTEST] N1MM glitch

[Steve Campbell]

HiI've tried posting this on N1MM reflector but responses so far have not resolved this problem.The issue is when using CW, whether full or semi break in,after about a second or less after keying stopped the rig would gointo TX for a second and then back to RX. This happened all the timeand severely impacted run stn because you always missed the first partof calling stn call sign. so much so we had to swap over main & mult stn. I've tried set up back at home without PC networking and the glitch is still there.The set up is no different from last year'S IOTA and we didn't haveany issues (I believe)then.Set up is IC756 Pro2, MicroHam Keyer,(rig & keying from 1 USB port) laptop XP with N1MM ver 8.6.4Can any of you guros help out with this? or is it something in the setup not quite correct?
P.S. I'm reasonably new to N1MM as I am a fan of SD & SDI - but without networking capability it's not much good for IOTA.
73's Steve GM4OSS(Part of IOTA 2008 team GI3YS Low Power, Rathlin Island, N. Ireland, EU122. Raw score 1042 QSOs - 210 Mults - 1,466,010 points)
73's de Steve - GM4OSS
_________________________________________________________________
Play and win great prizes with Live Search and Kung Fu Panda
http://clk.atdmt.com/UKM/go/101719966/direct/01/