[UK-CONTEST] N1MM glitch

[Chris G3SJJ]

I ain't a guru Steve but have a couple of suggestions!

N1MM - check what is in the F Key messages. I wonder if there is an 
additional character somewhere. If you can find someone with a good .mc 
file you could import that and select it. I can send you mine if that helps.

mHam Keyer - In the Router check the N1MM preset settings though I can't 
see what. Might be worth re-installing.

Chris G3SJJ

Steve Campbell wrote:
> HiI've tried posting this on N1MM reflector but responses so far have not resolved this problem.The issue is when using CW, whether full or semi break in,after about a second or less after keying stopped the rig would gointo TX for a second and then back to RX. This happened all the timeand severely impacted run stn because you always missed the first partof calling stn call sign. so much so we had to swap over main & mult stn. I've tried set up back at home without PC networking and the glitch is still there.The set up is no different from last year'S IOTA and we didn't haveany issues (I believe)then.Set up is IC756 Pro2, MicroHam Keyer,(rig & keying from 1 USB port) laptop XP with N1MM ver 8.6.4Can any of you guros help out with this? or is it something in the setup not quite correct?
> P.S. I'm reasonably new to N1MM as I am a fan of SD & SDI - but without networking capability it's not much good for IOTA.
> 73's Steve GM4OSS(Part of IOTA 2008 team GI3YS Low Power, Rathlin Island, N. Ireland, EU122. Raw score 1042 QSOs - 210 Mults - 1,466,010 points)
> 73's de Steve - GM4OSS
> _________________________________________________________________
> Play and win great prizes with Live Search and Kung Fu Panda
> http://clk.atdmt.com/UKM/go/101719966/direct/01/
> _______________________________________________
> UK-Contest mailing list
> UK-Contest at contesting.com
> http://lists.contesting.com/mailman/listinfo/uk-contest
>
>