[UK-CONTEST] BEVERAGE QUESTION
Chris G3SVL
Chris at G3SVL.com
Mon Feb 16 11:31:37 EST 2009
At 16:03 16/02/2009, Don Beattie wrote:
>In short, how straight does a Beverage need to be ? ..... For
>example if I put up a 200m long beverage with a kink from side to
>side of up to, say, 1 metre, would that be a reasonable antenna ?
Don,
Over the years there have been many discussions on the topband
reflector about beverages in run straight lines, zig-zagged, over
uneven ground, up hills, across valleys etc. And the received wisdom
is that with the small deviations you are suggesting it will make
very little difference .
I think the only real impact were if you were building phasing two
staggered beverages - which will go like stink BTW - then consistent
spacing is important along the length. Your soil conductivity will
probably have more effect than a 1m deviation.
I don't think EZNEC models beverages very well.
So go for it - or buy a chain saw ....
73 Chris, G3SVL
More information about the UK-Contest
mailing list