[UK-CONTEST] N1MM and multiple operator voice messages

[Rob - G4LMW]

Steve

For each operator, you need a folder within C:\Prog File\N1MM logger\WAV
So:

C:\Progr File\N1MM logger\WAV\G1ABC
C:\Progr File\N1MM logger\WAV\G2XYZ
C:\Progr File\N1MM logger\WAV\G3AAA

etc

In the config/files menu, it is not the "recorded wav file path" that you 
need to change (this should be "C:\Progr File\N1MM logger\"..... this path 
dictates where you QSO recordings for each contest go (if you have the 
"record QSOs" option tuned on).

The setting you need is that for "Letter file path", which should read:

C:\Prog File\N1MM logger\WAV\{operator}\Letters\

The location of the main F keys wave files is specified in the SSB macros, 
which should look something like this:

F1 CQ,wav\{operator}\cq.WAV

F2 Exch,wav\{operator}\exchange.WAV

F3 Thanks!,wav\{operator}\Thanks.wav

F4 {MYCALL},wav\{operator}\mycall.wav

F5 His Call,!

F6 QRL?,wav\{operator}\QRL.wav

F7 QRZ?,wav\{operator}\QRZ.wav

F8 Again,wav\{operator}\AllAgain.wav

F9 NR?,wav\{operator}\Number.wav

F10 Prec?,wav\{operator}\Precedence.wav

F11 CK?,wav\{operator}\Check.wav

F12 Long CQ,wav\{operator}\LongCQ.wav

F1 S&&P CQ,wav\{operator}\cq.wav



The ! in His Call will prompt N1MM to look for the "Letters" files


73, Rob
G4LMW
http://www.G4LMW.co.uk



----- Original Message ----- 
From: "STEPHEN LAWRENCE" <stephen.lawrence at btinternet.com>
To: <uk-contest at contesting.com>
Sent: Saturday, October 16, 2010 10:53 AM
Subject: [UK-CONTEST] N1MM and multiple operator voice messages


Morning chaps.

I have got N1MM working great for my own voice, but I wonder if there are 
any
experts out there that can tell me were I am going wrong at getting it to
recognise other ops voices.


I have just googled the subject and belive that I have it all set up 
correct.

Ive got three sets of voices recorded the numbers and letters and put these 
into
a file, stuck that in C:\Prog File\N1MM logger\wav\{operator}\cq.wav then 
the
next one is the rpt.wav etc etc etc.


I start N1MM - and go into config under config ports > Files > rec wave path 
is
set to c:\prog files\n1mm logger\wav\{operator}\

and the numbers and letters are stored as above but ending in
letters.....\{op...}\letters

When i do OPON or CTRL - O the op changes in the log OK but still no change 
of
voice, im runing version 10 of n1mm.......anyone got any ideas please of 
were i
am going wrong ?

73

Steve G4EOF
_______________________________________________
UK-Contest mailing list
UK-Contest at contesting.com
http://lists.contesting.com/mailman/listinfo/uk-contest


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.862 / Virus Database: 271.1.1/3199 - Release Date: 10/15/10 
19:34:00