[VHFcontesting] RE: [50mhz] 6 meter yagi

[Ian Wilson]

Here's a link for a pair of 3-element 6m yagis, one of which needs no
matching: http://www.cebik.com/yagi.html

(I built this one and can attest that it tunes up OK.  Not much 6m
activity around here, alas).

--ian


> -----Original Message-----
> From: 50mhz-admin at mailman.qth.net [mailto:50mhz-admin at mailman.qth.net]
On Behalf Of Mike Urich
> Sent: Wednesday, July 09, 2003 6:11 PM
> To: VHF Contesting; Rover; 50 mHz
> Subject: [50mhz] 6 meter yagi
> 
> Yes, I posting to three reflectors so please don't flame me.
> 
> I'm going to try to build a new 6 meter yagi for the contest next week
end.
> I'm only going with two elements for space considerations.  I'm also
> considering a driven / director configuration as opposed to reflector
/
> driven in as much as I'm not concerned about F/B ratios and being able
to
> hear off the back side may be advantages.
> 
> I went and looked at some different designs and have seen spacing from
as
> little as .17 wave to .30 wave.  I'm leaning towards somewhere around
.22 -
> .25 wave.  So I'm polling y'all to see what you have to say.
> 
> Mike Urich
> www.ka5cvh.com
> www.ka5cvh.com/vhf/vhfindex.htm
> 
> 
> 
> 
> 
> 
> Moderator: Ray Brown, KB0STN
> _______________________________________________
> 50mhz mailing list
> Home: http://mailman.qth.net/mailman/listinfo/50mhz
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:50mhz at mailman.qth.net