[VHFcontesting] FOR SALE

[Steve Tripp (K1IIG)]

I have 3 Rubidium 10meg frequency standards. There actually is 2 reference 
oscillators mounted in a 24" rack drawer, one oscillator is the rubidium and 
is cross locked to a hi-stab oven oscillator. They were used in a digital 
cellular system and are extremely accurate. I have tested them and they work 
fine compared to my GPS standard. They do have some advantages over GPS 
standards having no outside antennas, no worries about seeing satellites and 
no exposure to lightning, although GPS is the newer solution to frequency 
standards. They require 24-26vdc at 2amps (1 amp if the oven unit is 
removed) and put out >+10dbm. I am bringing these to the North East Weak 
Signal picnic tomorrow in Enfield CT and if you are going and interested in 
one, email me and I will save one for you. If you are not attending and are 
interested in one, email me and if they do not sell I will send you one. I 
believe the price is fair, $75 plus shipping should I have to do so. Great 
to freq lock beacons or transverters. The single unit removed from drawer is 
quite small.

Steve
    K1IIG ok in QRZ