[VHFcontesting] K4ESA/R Log NOW Fixed...

[Bob Mantell]

Thanks Zack,
 
That was why it was not working correct.  I had to edit the file AFTER export.  I had flagged Rover in the Software, and export said Rover, but not in the correct format  (see below)
 
I now show up as a ROVER,  
 
Looking at the posted logs, I bet there are lots of others who think they are posted as rovers but the robot took them as single-op. A quick scan showed 5 logs where the call has /R, but it shows single-op
 
 


 
73 de Bob,
 
 K4ESA EM74qc
 
Bob Mantell
k4esa at yahoo.com
 

--- On Wed, 7/22/09, Zack Widup <w9sz.zack at gmail.com> wrote:


From: Zack Widup <w9sz.zack at gmail.com>
Subject: Re: [VHFcontesting] Fw: [1151282.cq-vhf] K4ESA/R Log submiting wrong??
To: "Bob Mantell" <k4esa at yahoo.com>
Cc: "VHF Contesting Reflector" <vhfcontesting at contesting.com>
Date: Wednesday, July 22, 2009, 3:26 PM



Hi Bob,
 
I think you have to make it:
CATEGORY-OPERATOR: ROVER
 
Someone needs to work on their Cabrillo standards coordination.
 
73, zack W9SZ


On Wed, Jul 22, 2009 at 12:24 AM, Bob Mantell <k4esa at yahoo.com> wrote:

Why cannot  class me as a rover? The file looks ok going in?
 
Here is a copy of the header and what the robot replied:
 
 
START-OF-LOG: 2.0
CREATED-BY: N3FJP's VHF Contest Log 2.8
CONTEST: CQ-VHF
CALLSIGN: K4ESA/R
CATEGORY: ROVER 
CATEGORY-ASSISTED: NON-ASSISTED



73 de Bob,
 
 K4ESA EM74qc
 
Bob Mantell
k4esa at yahoo.com
 

--- On Wed, 7/22/09, Contest Robot <unreplyable at kkn.net> wrote:


From: Contest Robot <unreplyable at kkn.net>
Subject: [1151282.cq-vhf] K4ESA/R
To: "Bob Mantell" <k4esa at yahoo.com>
Date: Wednesday, July 22, 2009, 5:13 AM


2009 CQ World-Wide VHF Contest

             Callsign: K4ESA/R
    Category-Operator: SINGLE-OP
        Category-Band: ALL    (*** see below)
       Category-Power: HIGH    (*** see below)
                 
                 
*** Informative Messages from the Contest Robot ***

[X] No value is found for CATEGORY-BAND: --  I was expecting ALL or 50 or 144, so I set it to the default value of ALL.

[X] No value is found for CATEGORY-POWER: --  I was expecting HIGH or LOW or QRP, so I set it to the default value of HIGH.




_______________________________________________
VHFcontesting mailing list
VHFcontesting at contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting