[VHFcontesting] Cushcraft 13B2 Match

[R Johnson]

Hi Mike:
Sounds like you have most of the "T Match" already from your description.

Why don't you go to the CC site and look at the 13B2 diagrams to see what you actually need.
www.cushcraftamateur.com/prodsupport.php

Then you can go to the customer support page and pick how you want to contact them and
get prices on the part you need.
www.cushcraftamateur.com/custsupport.php

A number of people on this list have done this and have been happy with the reasonable cost
and fast service.

Unless you have something against a "T Match", I think this would be the best/fastest solution.

I'm getting ready to redo my 6M and 2M beams. I'm planning to get the parts from CC.

73
Bob, K1VU


At 12:28 9/25/2010, Mike Benonis wrote:
>Does anyone have experience building a custom match for the Cushcraft 13B2 antenna?  I recently got one, but it was missing all hardware and the match (basically, it came with boom and elements only, including the DE with the T-match pieces parts).  I feel like it should not be hard to build the match but I don't know what the balanced feedpoint impedance is supposed to be.
>
>Thanks and 73 de Mike KI4RIX
>
>
>
>Best regards,
>
>Mike Benonis
>mike at benonis.net
>KI4RIX
>
>_______________________________________________
>VHFcontesting mailing list
>VHFcontesting at contesting.com
>http://lists.contesting.com/mailman/listinfo/vhfcontesting