[VHFcontesting] 1296 transverter, amp, preamp, 2m transverter and other stuff F.S.

[Bill Olson]

both transverters and the preamp are sold..
 
still have the 1296 amp and the HTX100
 
thanks to all who responded,
 
bill K1DY in Maine




 
> From: callbill at hotmail.com
> To: vhfcontesting at contesting.com
> Date: Wed, 1 Jun 2011 18:27:19 +0000
> Subject: [VHFcontesting] 1296 transverter, amp, preamp, 2m transverter and other stuff F.S.
> 
> 
> Hi gang, I just did some tower work for a local ham and ended up with a 40 watt DEMI 1296 transverter!!Soooo.. I now have available a DEMI 1296-144 transverter. This is the original one with hairpin filters and housed in a Hammond die cast box. M67715 output module does 2.5-3 watts. input adjustable up to about 2 watts where it is set now. It's set up for common IF and RF but that can be easily changed. everything is in there. I also have a DEMI 2318PA (? not sure of the model number - I built it from a kit.. it's a single M57762 module in a die cast box with heatsink). finally a DEMI 23LNA in a waterproof rose box. This all with an antenna relay (not supplied) and a 2m rice box makes a pretty nifty 18-20 watt 1296 setup.1296 transverter $150amp $100preamp $50Also have an original DEM 144-28 transverter 25 watts out, under .5dB NF. right now set up for split IF and +2dBm input. Output can be split or single port. Has TUF1H high level mixer..all tested ready to go.2M transvert
> er $150have a realistic HTX100 10M mobile rig all set up to actually drive the above 2m (or any other) transverter. split RX and TX with low level output on TX and gnd to TX ptt line outHTX100 $50I can get any of this to you by the June contest. payPal preferred but not mandatory..bill, k1DY 
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting at contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting