[VHFcontesting] 222 Transverter PCB kit info needed.

[Bruce Herrick]

Hmmm - must be different versions.  Mine is Rev. 3 dated 2012.  It's 2.5" X 3.8"

Bruce WW1M


-----Original Message-----
>From: Zack Widup <w9sz.zack at gmail.com>
>Sent: Mar 18, 2016 7:17 PM
>To: Tim Marek <k7xc_tx at yahoo.com>
>Cc: VHF Contesting <VHFcontesting at contesting.com>
>Subject: Re: [VHFcontesting] 222 Transverter PCB kit info needed.
>
>The W1GHZ boards are about 2.0 X 2.5 inches. I have one right in front of
>me. Nice little boards for use as microwave IF's or for Rovers. I use one
>as a 432 to 28 MHz intermediate transverter for my 24 GHz transverter. If
>you plan on adding on power stages to get significant power, a little more
>filtering is needed beyond the helical filter on the board.
>
>73, Zack W9SZ
>
>On Fri, Mar 18, 2016 at 5:58 PM, Tim Marek via VHFcontesting <
>vhfcontesting at contesting.com> wrote:
>
>> Now that you all have said it the call sounds very familiar.
>>
>> Currently as I hit the late 50s my memory isn't as reliable as it once
>> was, sighs.
>> Getting older isn't for the faint of heart!
>>
>> Thanks guys!
>>
>> 73s de Tim - K7XC - DM09jh... sk
>>  Everything should be made as simple as possible, but no simpler…Albert
>> Einstein
>>
>>       From: "aa9il at sbcglobal.net" <aa9il at sbcglobal.net>
>>  To: Sean Waite <waisean at gmail.com>; k7xc_tx <k7xc_tx at yahoo.com>
>> Cc: VHF Contesting <VHFcontesting at contesting.com>
>>  Sent: Wednesday, March 16, 2016 3:37 PM
>>  Subject: Re: [VHFcontesting] 222 Transverter PCB kit info needed.
>>
>> Correct - W1GHz had a 222 transverter and that article may still be on his
>> website - this was made to interface with the 817.
>>
>>     On Wednesday, March 16, 2016 5:12 PM, Sean Waite <waisean at gmail.com>
>> wrote:
>>
>>
>>  I think W1GHZ had/has a small board 222 transverter, unsure what the IF
>> frequency on that is though
>>
>> Sean WA1TE
>>
>> On Wed, Mar 16, 2016 at 5:48 PM, k7xc_tx via VHFcontesting <
>> vhfcontesting at contesting.com> wrote:
>>
>> > Hi All,
>> >
>> > I have the PCB for a 222 MHz tranverter kit that I think uses a 14 MHz
>> IF.
>> > It's not a very large board,  maybe 2.5" X 3.5".
>> >
>> > I hope this rings a bell with someone as I am seeking the documentation
>> > for it and hope one here can help me out or point me to where it is
>> > located.
>> >
>> > Thanks and 73s de Tim - K7XC - DM09jh... sk
>> >
>> > Adapt, Overcome, Succeed!
>> >
>> >
>> > Sent from my MetroPCS 4G Android device
>> > _______________________________________________
>> > VHFcontesting mailing list
>> > VHFcontesting at contesting.com
>> > http://lists.contesting.com/mailman/listinfo/vhfcontesting
>> >
>> _______________________________________________
>> VHFcontesting mailing list
>> VHFcontesting at contesting.com
>> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>>
>>
>>
>>
>>
>> _______________________________________________
>> VHFcontesting mailing list
>> VHFcontesting at contesting.com
>> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>>
>
>
><https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=oa-2115-e>
>Scanned
>for viruses. www.avast.com
><https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=oa-2115-e>
><#DDB4FAA8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>_______________________________________________
>VHFcontesting mailing list
>VHFcontesting at contesting.com
>http://lists.contesting.com/mailman/listinfo/vhfcontesting