[VHFcontesting] Weak Signal FM, open squelch, and VHF Contesting (was FT-991 for FM contesting)

[Mark Spencer]

Sorry for another partial thread change (:

Over the years I have been quite surprised with how well FM works compared to SSB when contesting.    At first I thought perhaps my equipment wasn't working well on SSB, but I have noticed other operators having similar results.

Yes SSB is better than FM but in practice I don't think it is as better as some people believe / communications theory might lead one to believe (at least in my part of VE7Land.)

73

Mark S
VE7AFZ
mark at alignedsolutions.com
604 762 4099

> On Feb 26, 2020, at 11:04 AM, JamesDuffey <jamesduffey at comcast.net> wrote:
> 
> Alan - Sorry I can’t help with your FT991 issues, but if you don’t mind me hijacking the thread a bit, I would like to say a few things about weak signal contesting using FM.
> 
> Below the capture threshold, usually about 10dB signal to noise ratio, FM behaves much like other signals with amplitude, not frequency, modulation. That is, there is a linear increase in demodulated signal strength for a linear increase in input signal strength up to the capture threshold of about 10dB SNR or so. So, there is usually useful communication ability if the squelch is lowered to the point where it is ineffective in squelching the noise. You can usually hear the station. The downside to operating in this region is the increased bandwidth, which results in increased noise.
> 
> I have had many long distance QSOs on FM operating below the capture threshold, mostly in AZ during the January contest when SOTA stations often operate from mountain tops with low power handhelds. I remember one QSO of 90 miles or so on 1296 where the other station was having trouble hearing me. After several go around, someone on frequency, who could hear both of us, kept telling him to turn down his squelch. He finally did and we made the QSO.
> 
> About the only time I operate FM is during the contests, but I find listening to a squelched radio unnerving. I expect to hear noise in the receiver when I stop transmitting. It seems unnatural not to. How do you know it is working? - Duffey KK6MC
> 
> James Duffey KK6MC
> Cedar Crest NM
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting at contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting