RTTY Setup problems

[Raj Singh VE6RAJ]

Hi Robert:
I don't have a PK232, but did try to help Vic VE6PC get his going with
Writelog. Although we were unsuccesful in getting it going, I woould
suggest you consider at the following. If you use PC-Pakrat make sure
that it is set to 
	HOST MODE ON EXIT - DISABLED
and	FAST INITIALIZATION - DISABLED
you could also try a slower baud rate e.g. 2400,N,8,1

We had marginal success after hours of fooling around and Vic ended up
buying a KAM+

73
Raj VE6RAJ

Robert D. Edmondson wrote:
> 
>         I just purchased Writelog V9.12c & am having trouble getting RTTY to
> operate.
>         I am using a PK232MBX TNC & when I try to initialize the unit I receive.
> 
>                         INITIALIZING HOST MODE
>                         PLEASE WAIT
> 
>         After waiting for several minutes the WAIT window is still there & nothing
> happens.
>         I am using COM5 at 9600 8/none/1/Xon-Xoff.
>         I also added the following to the Writelog.ini.:  com5=9600,n,8,1,x
> 
>         The TNC works fine with the RTTY program in Dx4Win.
>         I must be doing something wrong, any help would be appreciated.
> 
>                                         73's Doyle/N4VV