[WriteLog] data from FT-1000MP

[w9hly@decaturnet.com]

Another gentleman suggested that. I tried it and it made no 
difference.

After posting my first message, I fired up MpMem and I was able to 
read (talk to) my FT-1000MP.

Tks for you interest.

Vern W9HLY

On 24 Aug 2001, at 0:43, Dennis Egan wrote:

> Vern
> 
> Its N82.  Good Luck.
> 
> Dennis NB1B
> ----- Original Message -----
> From: <w9hly@decaturnet.com>
> To: <WriteLog@contesting.com>
> Sent: Thursday, August 23, 2001 11:40 PM
> Subject: [WriteLog] data from FT-1000MP
> 
> 
> > I'm lost!
> >
> > Following K9JY's info page and the HELP files for WriteLog I have
> > not been able to create a setup that will allow me to read freq from
> > the radio. COM 3 (assigned to the radio) works, controlling MMTTY as
> > a stand alone. So the port works. I change WriteLog.ini [PORTS] to
> > 4800,n,8,1,. I eliminated the 'x' char.
> >
> > Using SETUP/PORTS, under RIG for COM3 I have it checked.
> > Select radio. Click the OK button and program hangs. An error
> > message states that " " mypgm.wl-WriteLog" program is not
> > responding ". Click RETRY. Same error message repeats
> > continuously.
> >
> > A hint to overcome my personal problem would be welcome.
> >
> > Vern W9HLY
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> 
> 
>